|
TEERM Reports - Adhering to the
documentation guidelines of the proven TEERM methodology is an
important aspect of all active P2 projects managed by TEERM. For
each active project, the status of the following types of technical
documents is noted:
·
Joint Test Protocol (JTP) - Documents the critical
technical and performance requirements that an alternative material
or process must meet to be considered acceptable.
·
Potential Alternatives Report (PAR) - Documents the
viable alternatives, the down-selection process, and the
alternatives ultimately recommended for testing/ implementation.
·
Joint Test Report (JTR) - Documents the testing and
test results, and provides analysis and conclusions. |
| Active Projects |
Documents Completed to Date |
Bio-based
Material's Characteristics and Evaluation
(JG-PP Project)
Rusty McLaughlin |
|
Low-Temp Cure Powder Coatings
(ESTCP/JG-PP Project) (2006-2008)
Rusty McLaughlin
Pattie Lewis Burford |
|
NASA-DoD Lead-Free Electronics Project
Project Number: NT-1504
Kurt Kessel
Greg Krivdo |
-
Joint Test Protocol – Final - October 8, 2007
- (NLFE Project JTP October-08-2007.pdf, 666KB, 36 pages, October 8, 2007)
-
Project Plan - Final - March 28, 2008 (NASA-DoD LFE Project Plan March-28-2008_F.pdf, 6MB, 95 pages, March 28, 2008)
|
|
| Completed Projects |
Documents Completed to Date |
Alternatives to High-VOC Chrome Coatings (C3P Project)
Matt
Rothgeb |
|
Corn Hybrid Polymer Coating Removal
(JG-PP Project) (2005-2008)
Matt
Rothgeb |
|
Laser Coating Removal for Ground Support Equipment
Project Number: NT-1203
Matt
Rothgeb
Rusty McLaughlin |
-
Final Report - (NASA.PROJ.PLCRS.FTR.MR.01May08.F.pdf, 2MB, 54 pages, May 01, 2008)
|
Laser Coating Removal for Shuttle (2005-2008)
Matt
Rothgeb
Rusty McLaughlin |
-
Final Report - (NASA.PROJ.PLCRS.FTR.MR.01May08.F.pdf, 2MB, 54 pages, May 01, 2008)
|
Lead-Free Solder Body of Knowledge (NASA) (2005)
Kurt Kessel
Matt Rothgeb |
- Technology Readiness Overview detailing previous test results, current test
programs, industry trends, regulatory trends, and risk mitigation strategies for NASA programs/projects
http://nepp.nasa.gov
|
Lead-Free Solder Testing for High Reliability (Project 1)
(2001-2006)
Kurt Kessel |
|
Low/No-VOC and Nonchromate Coating System for Support Equipment
(JG-PP Project)
(1999-2003)
Kurt Kessel |
|
Low-VOC ID Marking (ESTCP/JGPP
Project) (1998-2003) B. Greene |
|
Non-Chrome Primers for Aircraft
Exteriors (JG-PP Project) (1995-2004)
Kurt Kessel |
|
Oxygen Systems Cleaning
(ESTCP/JG-PP Project)
(1999-2003) John Herrington
Matt Rothgeb |
|
Oxygen
Cleaning Products (2007-2008)
Rusty McLaughlin |
|
Parts Washers (NASA) (2004-2005)
Matt
Rothgeb |
- Final Report - (Environmentally Preferable Part Washers Project - Final Report with
Appendices.pdf, 5 MB, 206 pages, April 2006)
|
Portable Laser Coating Removal (ESTCP/JG-PP Project) (2001-2005)
Matt
Rothgeb |
|
Solder Assessment Study (NASA) (2002-2003)
Matt
Rothgeb |
-
Final Report (NASA Lead Free Solder Final Report.pdf, 916KB, 49 pages,
April 17, 2003)
|
TOP OF PAGE
|